Home

Products

Prices

FAQ's

Contact Us

AA Solar Website

SunPowerPlus Trade Me Site

S T U D E R   P U R E   S I N E W A V E I N V E R T E R S

AJ Series Pure Sinewave Inverters SI Series Pure Sinewave Inverters

	AJ Series Pure Sinewave Inverters
	The AJ series offer: A range from 200 to 2000VA continuous High efficiency An outstanding overload capacity, thanks to the combined use of a toroidal transformer and a MOS power stage Digital regulation and microprocessor controller An AC electrical supply to any kind of electrical device A complete internal protection of the inverter (overload, over temperature, short circuit and reverse polarity) An adjustable stand-by level on a large range and from a very low level (optional for AJ275-12 and AJ350-24) Battery and output cables mounted Easy wall mounting by 4 external screws Click here for prices  Model AJ275-12 AJ350-24 AJ500-12 AJ600-24 AJ1000-12 AJ1300-24 AJ2100-12 AJ2400-24  Inverter  Nominal battery voltage 12V 24V 12V 24V 12V 24V 12V 24V  Input voltage range 10.5-16V (24V max) 21-32V (44V max) 10.5-16V (24V max) 21-32V (44V max) 10.5-16V (24V max) 21-32V (44V max) 10.5-16V (24V max) 21-32V (44V max)  Continuous power @ 25°C 200VA 300VA 400VA 500VA 800VA 1000VA 2000VA 2000VA  Power 30 min @ 25°C 275VA 350VA 500VA 600VA 1000VA 1300VA 2100VA 2400VA  Power 5 min @ 25°C 350VA 500VA 575VA 675VA 1200VA 2000VA 2450VA 2800VA  Power 5 sec @ 25°C 450VA 650VA 1000VA 1200VA 2200VA 2800VA 5000VA 5200VA  Maximum asymmetric load 150VA 150VA 250VA 300VA 500VA 600VA 1000VA 1200VA  Maximum efficiency 93% 94% 93% 94% 93% 94% 92% @ 300VA 94% @ 300VA  Detection of the load Adjustable: 1 →20W  Current of short circuit 2 sec (exit) 2.3A 3.2A 5.2A 5.7A 10A 13A 26A 30A  Output voltage Sinewave 230VAC ±10%  Frequency 50Hz ± 0.05% (crystal controlled)  Distortion THD (resistive load) < 5% (@ Pnom) < 3% (@ Pnom & Vin nom)  Consumption Stand-by 0.4W 0.6W 0.7W 1.2W 0.7W 1.2W  Consumption <ON> no load 2.4W 3.5W 4.6W 7.2W 10W 13W 16W 16W  Overheat protection (±5°C) Shut down @ 75°C - Auto restart @ 70°C  Overload and short circuit protection Automatic disconnection with 2 time restart attempt  Reverse polarity protection Protected by internal fuse Protected by internal fuse 125A Protected by internal fuse 100A Not protected Protected by internal fuse 150A  Deep discharge battery protection Shut off @ 0.87 x Vnom - Automatic restart @ Vnom  Maximum battery voltage Shut off @ >1.33 x Vnom - Automatic restart @ Vmax  Acoustic alarm Before low battery or overheating disconnection  General data  Weight 2.4kg 2.6kg 4.5kg 8.5kg 19kg 18kg  Dimensions (L x W x H) 142 x 163 x 84 mm 142 x 240 x 84 mm 142 x 428 x 84 mm 273 x 399 x 117 mm  Operating temperature -20°C up to +50°C  Relative humidity in operation 95% without condensation  Ventilation forced From 45°C ± 5°C  Acoustic Level < 48dB (with ventilation)  Approximate correction of Pnom -1.5%/°C since +25°C  Recommended battery capacity > 5x Pnom/Vnom (recommended value in Ah)  Length cables (Battery / left AC) 1.2m / 1m 1.5m / 1m 1.7m / 1m  Options  Remote Control Ability Optional Yes JT8 Remote Control Click here for a downloadable PDF version of this information
	Back to Top

	SI Series Pure Sinewave Inverters
	The SI series offer: A high and steady efficiency An outstanding overload capability, thanks to the combined use of a toroidal transformer and MOS power stage An ultra-fast regulation An electrical supply to any kind of device A complete internal protection of the SI (overload, overheat, short-circuit, reverse polarity) A stand-by level adjustable on a large range and from a low threshold on No noise thanks to HF-switching > 20kHz The possibility to assemble 3 inverters (min SI1200) in a 3-phased 3x400C stand-alone grid Twin-power option available, which enables the permanent use of very small loads (like alarms and security systems) with outstanding efficiency Click here for prices  Model SI1212-TP SI3324-TP  Inverter  Voltage Input (Vnom) 12V 24V  Input voltage range 11.40 V ~ 15.96 VDC 22.80 V ~ 31.92 VDC  Continuous Power 1200W 3300W  Power 15 min @ 25°C 1560W~1920W 4290W~5280W  Power 3 min @ 25°C 1920W~2400W 5280W~6600W  Power 5 sec @ 25°C 4200W 11550W  Load detection (stand-by) Adjustable: 0.3 →20W  Maximum Efficiency 93-95% 95%  Standby current 25mA 25mA  Power <ON> no load 4.8W 13W  Power <ON> no load   TWIN-POWER system < 0.5W < 0.7W  Output voltage Sinewave 230VAC ±3 %  Frequency 50Hz ± 0.01% (crystal controlled)  Distortion < 2% (at Pnom)  Protections Overload, Overheat, Short circuit, Reverse polarity by internal fuse  Overheating protection 75°C ± 3°C  General Data  Weight 13.2kg 30kg  Size (L x W x H) 391 x 124 x 215 mm 636 x 124 x 215 mm  Forced ventilation From 45°C ± 3°C  Acoustic level without ventilation: < 40dB / with ventilation:< 45dB Click here for a downloadable PDF version of this information
	Back to Top

Updated May 2011